Product ID:3M BRAND CORROSION RESISTANT COATING-1706
MSDS Date:11/02/1985
FSC:8030
NIIN:00-962-0685
MSDS Number: BFZJC

3M-ADHESIVES,COATINGS AND SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110 OPERATOR 55

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

POLYCHLOROPRENE

Fraction By Weight: SEE #5%

CHLORINATED NATURAL RUBBER

Fraction By Weight: SEE #5%

PHENOLIC RESIN BLEND

Fraction By Weight: SEE #5%

MICA/TIO*2/CARBON BLACK FILLER BLEND

Fraction By Weight: SEE #5%

TOTAL OF ABOVE BLEND (1-4)=31%

RTECS: 9999999ZZ

Fraction By Weight: 31%.

TRIBASIC LEAD MALEATE

CAS: 9134-34-6

Fraction By Weight: 2%.

OSHA PEL 0.15 MG/CUM AS PB

ACGIH TLV: NOT LISTED

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 15%.

OSHA PEL 100 PPM

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 40%.

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 12%.

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: EYE/SKIN/INHAL: IRRITATION.
CHRONIC:NERVOUS SYSTEM IMPAIRMENT, POSSIBLE LIVER OR KIDNEY DAMAGE.
INHAL: OVEREXPOSURE TO XYLENE VAPORS MAY CAUSE RESPIRATORY
IRRITATION, NERVOUS SYSTM. IMPAIRMENT , LIVER OR KIDNEY DAMAGE &
BLOOD CHANGES. GROSS OVEREXPOS. RESULTS IN LUNG DAMAGE, BRAIN
DISORDERS.
Effects of Overexposure:EYES: VAPOR & LIQUID MAY CAUSE IRRITATION-
W/TEARING, BURNING SENSATION, & BLURRED VISION; SKIN: MAY CAUSE
IRRITATION, CRACKING & DEFATTING OF SKIN W/PROLONGED OR REPEATED
CONTACT; INHAL: DIZZINESS, L IGHTHEADEDNESS, WEAKNESS & HEADACHE;
INGEST: DIGESTIVE SYSTEM IRRITATION & NAUSEA.

First Aid:EYE: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 10 MIN.
& GET MED. ATTN.; SKIN: WASH AFFECTED AREA W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING; INHAL: IMMEDIATELY PROVIDE FRESH AIR. IF NOT
BREA THING, GIVE ARTIFICIAL RESPIRATION. CALLA PHYSICIAN; INGEST:
DO NOT INDUCE VOMITING- GET IMMEDIATE MEDICAL ATTN.

Flash Point Method:SCC
Flash Point:71F/21.7C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:FLAMMABLE! OVERHEATED, CLOSED CONTAINERS
ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

Spill Release Procedures:OBSERVE PRECAUTIONS IN ALL SECTIONS.
EXTINGUISH ALL IGNITION SOURCES. COLLECT SPILLED MATERIAL, CLEANUP
RESIDUE & STORE IN CLOSED METAL CONTAINER(DOT TYPE).

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & FLAME.
USE ONLY IN AREAS ADEQUATELY VENTILATED W/ENOUGH AIR MOVEMENT OT
REMOVE VAPORS & PREVENT BUILDUP.
Other Precautions:UTILIZE PERSONAL PROTECTION EQUIPMENT WHEN HANDLING
THIS PRODUCT, IMPERVIOUS GLOVES & CHEMICAL GOGGLES OR SAFETY
GLASSES. STORE IN COOL PLACE AWAY FROM IGNITION SOURCES.

Respiratory Protection:NIOSH APPRVD ORGANIC VAPOR/MIST TYPE RESPIRATOR.
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP VAPOR LEVEL BELOW
PERMISSABLE EXPOSURE LIMIT.
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:CHEMICAL GOGGLES OR SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO MINIMIZE REPEATED OR
PROLONGED EXPOSURE FOR TASK AT HAND.
Work Hygienic Practices:PREVENT CONTACT W/EYES & SKIN. AVOID PROLONGED
BREATHING OF VAPORS. WASH HANDS THOROUGHLY BEFORE EATING.
Supplemental Safety and Health
3M ID(62-1706-6530-1,62-1706-8530-9)

HCC:F2
Boiling Pt:=135.C, 275.F
Vapor Pres:6 MM
Vapor Density:3.6
Spec Gravity:1.0
Viscosity:10,000 CPS
Evaporation Rate & Reference:(ETHER = 1); 9.2
Solubility in Water:VERY LOW
Appearance and Odor:BLACK VISCOUS LIQUID; STRONG SOLVENT ODOR
Percent Volatiles by Volume:69.

Stability Indicator/Materials to Avoid:NO
MFR CITES NONE.
Stability Condition to Avoid:HI-TEMPERATURES & IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION & BURNING MAY
PRODUCE: CO, CO*2, OXIDES OF LEAD & CHLORINATED DECOMPOSITION
PRODUCTS.

Waste Disposal Methods:COMMERCIAL INCINERATION W/DESTRUCTION & REMOVAL
EFFICIENCY GREATER THAN 99.99% OR RECLAMATION IS PREFERRED.
OTHERWISE DISPOSE OF IAW APPLICABLE REGULATIONS. USE EPA HAZ WASTE
ID= D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.